AFL SMLP5-5-SC – SM/MM Optical Fibre Loss Test Kit (850/1300/1310/1550nm)

The SMLP5-5 test kit combines the OPM5-2D optical power meter and OLS4 integrated LED and LASER light source and is ideally suited for testing fiber optic networks with hybrid (single-mode and multimode) cables.The OLS4 features 850 nm and 1300 nm LED output from a multimode output port and 1310 nm and 1550 nm LASER output from a single-mode output port. The LED and LASER outputs are stabilized to ensure accurate test results per current TIA/EIA requirements.This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. Both output ports are equipped with removable SC (FC or ST available) adapters to allow the output connectors to be inspected and cleaned.The OPM5-2D offers Wave ID, automatic wavelength identification and switching, when used with the OLS4 light source. Multiple test Tone detection is provided for fiber identification. The OPM5-2D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or ìW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. Up to 500 records per wavelength of power or insertion loss measurements may be stored in internal non-volatile memory.Using the Windows® compatible software and USB connection, test records may be transferred to a PC for storage, display, analysis, and printing.In addition to being powered by two AA alkaline, the OPM5-2D or OLS4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack.The OPM5-2D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately.The OPM5-2D and OLS4 are fully N.I.S.T. traceable.FeaturesRugged, Handheld, LightweightDesigned for Field UseCertify Multimode and Single-Mode links per TIA/EIA StandardsWave ID – Automatic Wavelength Identification and SwitchingWave ID, CW, and Modulated Tone (on single-mode output)270 Hz, 330 Hz, 1 kHz, and 2 kHz ToneLarge LCD with BacklightPower Measurements in dBm or ìW; Insertion loss in dBReference Power Level StorageAA Alkaline, Optional Rechargeable NiMH Battery Pack or AC AdapterLow Battery IndicatorCost-Effective, Easy to UseN.I.S.T TraceableAvailable with FC, SC or ST adapter CapsApplicationsInsertion loss testing on multimode & singlemode LAN/WANsPassive Optical Networks (PON)Fiber identification prior to splicingMeasuring network powerIncluded:OPM 5-2D Optical Power MeterOLS 4 Optical light source with Wave ID2 x MandrelsQuick Start GuideFactory calibration documentsAFL Carry Bag with StrapCondition: Excellent condition, Tested workingREMARKSItems ship as shown in the gallery photos.No additional parts, accessories or options are included if not pictured.Warranty: Should there be a defect or item not as described warranty claim must be made within 30 days of item being deliveredRETURNPlease contact us first before returning. Return can be accepted within 30 days of item being delivered; it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item, and the original postage cost or import/custom duty paid is not refundable, any additional options purchased or service & labour costs are not refundable.SHIPPINGWorldwide and Australia wide Express shipping options available.Buyer pays for all shipping cost and is responsible for any import duty and custom clearance charges.