AFL Noyes OLS2-DUAL & OPM4-2D Fibre Optic Power Meter & Source Test Set – Insertion Loss tester

OPM 4 Optical Power Meter and OLS2 DUAL Fibre Optic Source w/ Wave IDThe Noyes OLS2-DUAL & OPM4-2D Fibre Optic Power Meter may be used to measure optical power in Premises, Telco, or Broadband fibre optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature.Multiple test Tone detection is provided for fibre identification. The OPM 4 stores optical references for each calibrated wavelength. An easy-to-read Dual Wavelength LCD with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status.In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.Features:Rugged, handheld, lightweightMultimode or single-mode applicationsPremises (Ge), Telco (InGaAs), and Broadband ( 26 dBm) modelsWave ID – automatic wavelength identification and switchingPassive Optical Networks (PON) testingDual Wavelength testing270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detectionLarge LCD with BacklightPower measurements in dBm or µW; insertion loss in dBReference power level storageBattery GaugeN.I.S.T traceableIncluded:AFL Noyes OLS2 Dual SM Fibre Light SourceSM Source:1310nm1550nmFC Connector For SourceNoyes OPM 4-4D Single Mode Multimode Fibre Optic Power Meter850nm1300nm1310nm1490nm1550nm5mm Universal Connector for MeterCarrying Case for both units Remarks:Excellent Condition – , Tested Fully Operational.